TR3650 Bearing and Seal kit - $325.00
- This kit includes:
Front and rear counter shaft bearings, main shaft bearing, input shaft bearing,
caged input bearing, plastic fork pads, input seal and tail seal
*(Need to specify if the tail seal is for a
2005+ or a 2004-)
Deluxe TR3650 Synchro Ring Kit - $560.00
- This kit includes:
2 packages of two rings each. Fits gears 3,4,5 & Reverse
1 package of two 3-piece redesigned rings for first and second gears
*(2005 and newer
TR3650's already have these redesigned rings)
Intermediate TR3650 Synchro Ring Kit - $430.00
- This kit includes:
2 packages of two rings each. Fits gears 3,4,5 & Reverse
1 package of the 3-piece redesigned rings for second gear
1 lined center ring for first gear
Basic TR3650 Synchro Ring Kit - $300.00
- This kit includes:
2 packages of two rings each. Fits gears 3,4,5 & Reverse
2 lined center rings for first and second gears
*(you would re-use the existing inner and outer 1-2 rings with this kit)
Fork Pad Upgrade Kit - $55.00
- This kit includes:
4 Bronze Fork Pads for the 1-2 & 3-4 shift forks
2 extra-hard roll pins for the 1-2 & 3-4 shift forks
26 Spline TR3650 Input Shaft - $400.00
-These are new atermarket shafts made with a 26 spline shank.
-The stock 10-spline input shaft is the weak spot in a stock TR3650.
- Must specify 2001-2004 or 2005-2010 type, as these are different lengths.
01-04 UPDATE PARTS
- To update a 2001-2004 TR3650 the following parts are needed:
Deluxe TR3650 Synchro Ring Kit
Second Gear
1-2 "Gorilla" shift fork and rail assembly
1-2 Synchro Hub assembly
*(Fill a 2001-2004 TR3650 transmission to 3/4 inch below the fill plug)
TR3650 Input Shaft bearing - w/race $20.00 - w/o race $15.00
- If you are replacing your input shaft you will need a new bearing
Shift Fork and Rail Assemblies - 2001-2004
- 1-2 "Gorilla" Shift Fork (Updated for 01-04) - discontinued
- limited supply - $150.00
- 3-4 Shift Fork (Original Style for 01-04) - discontinued -
limited supply - $150.00
- NEW! Monster Forks - a 1-2 fork and a 3-4 Shift Fork in a kit made
from Billet Aluminum 2001-2004 only - $350.00/pr
Shift Fork and Rail Assemblies - 2005-2010
- 1-2 Shift Fork (Original Style 05-10) - subject to
availability - $150.00
- 3-4 Shift Fork (Original Style for 05-10) - subject to
availability- $150.00
- NEW! Monster Forks - a 1-2 fork and a 3-4 Shift Fork in a kit made
from Billet Aluminum 05-10 only -
limited supply - $350.00/pr
Synchro Hub Assemblies
- Set of 3 Keys/Struts w/3 springs for any TR3650 Synchro Hub (Kit) - $18.00
- 1-2 Synchro Hub (Updated for 01-04, original for 05-10) - -
limited supply - $175.00
- 3-4 Synchro Hub - (all years) - -
limited supply - $175.00
- 5th. Synchro Hub (part of countershaft fifth gear)
- Reverse Synchro Hub (part of main shaft reverse gear)
Gears
- Second Gear (Updated for 01-04, original for 05-10) -
limited supply - $180.00
- Third Gear - (All years)
limited supply - $150.00
- Fifth Gear (0.62 ratio)
Main shaft gear - 32t
Counter shaft gear - 63t
- Fifth Gear (0.68 ratio)
Main shaft gear - 34t
Counter shaft gear - 61t
- Fifth Gear (0.74 ratio)
Main shaft gear - 36t
Counter shaft gear - 59t
Additional Rebuild Parts:
Clutch Fork 1994-2004 V-6 and V-8 (OEM)
- call for price
Clutch Pivot Bolt (Pivot Ball) (94-04 OEM) -
$22.00
Billet Throwout Bearing Quill Tube (fits
01-04 TR3650 also fits 99-01 T-45) - $65.00
Please note that prices are subject to change and can vary from what is
listed above.